Shenzhen H&Y Technology Co., Ltd.
Main products:baby monitor,power adapter,car fm transmitter
Products
Contact Us
  • Contact Person : Ms. lee circle
  • Company Name : Shenzhen H&Y Technology Co., Ltd.
  • Tel : 0086-755-75588360552
  • Fax : 0086-755-75588305672
  • Address : Guangdong,Shen Zhen,Rm13F ,GaoKeLi Building B, Rd HuangGang ,FuTian district
  • Country/Region : China
  • Zip : 580025

For Daily Health Diet LED Electronic Tester Salt Salinity Tester Analyzer

For Daily Health Diet LED Electronic Tester Salt Salinity Tester Analyzer
Product Detailed
1.Probe : measure salt concentration; 2.7 red LED for indicating salt concentrations; 3.One green LED as power indicator.

Introduction

     Too much salt in human's diet will easily lead hypertension.Researches show over 10 grams of salt in human's daily diet has higher chances of causing hypertension.Human body should aim at taking leas than 10 grams of salt daily .The salt analyzer uses conductivity test to measure the salt concentration in liquid food.Thus ,the salt content can be derived to control the daily intake of salt and maintain health .The equipment features in touch pad control, seven red LED indicators,green LED power indicator,easy operation and simple use. It is good for your health care.

Description of parts

Description of functions

     Please to the figure showing parts of the analyzer for description of functions.

Probe : measure salt concentration   

Panel :  7 red LED for indicating salt concentrations:0.3%—0.6%(Moderate);  0.8%—1.0%(Thick);  1.3%—2.0%(Very Thick).

Indicator : One green LED as power indicator.

Push Button : ON push button:press the button to power on,then it is ready for measurement.

Description of use

Check the cleanness of the probe.Use neutral detergent for cleaning.Put the sample in a container with a certain liquid level.Press power button ON. The green power light should be on.If not, it is low battery power and battery replacement is required.Put the probe under the liquid surface by at least 2cm and keep a distance of at least 1cm from the container wall.When the indicator light is stable,take the highest reading as the measured value.When the measurement is completed,use neural detergent for cleaning the probe.

Specifications

Power requirement : 4×1.5=6V       LR 44×4Load current : MAX  20mA (all LED on)Dimension :  212 × 24.8 × 15.4 (mm)Weight : approximately 36 gramsRange of Measurement : 0.3%—2.0% Range of temperature apply : 60°c—80°cFormula : Salt content =Total quality & quantity × concentrationExample : Total quality & quantity of glass of solution is 150g and its concentration is 0.5%      150g × 0.5% = 0.75g

Notes fo battery change

When the voltage is low,the green power light will be off. It indicates that battery power is low and battery change is required.Remove batter cover and take out four used batteries and dispose them properly.Keep out of reach of children (as shown in Figure).Put four 1.5V new alkaline batteries back to battery compartment (as shown in Figure).

Maintenance

Cleaning :

Use clean water to rinse or cloth with neutral detergent to clean the probe.Do not use water or clothe with neutral detergent to clean the main unit.Do not use alcohols,diluents and gasoline to clean the probe and the main unit.

Storage :

Avoid falling of shaking of the equipment.Otherwise,malfunction may occur.Keep out of heat,direct sunlight exposure and dampness.Remove battery when the equipment is not used for a long time.

For Daily Health Diet LED Electronic Tester Salt Salinity Tester Analyzer



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.